논문 상세보기

대한설비관리학회> 대한설비관리학회지> 반도체 EDS 검사 공정의 설비 용량 계획에 관한 최적화 모델

KCI등재

반도체 EDS 검사 공정의 설비 용량 계획에 관한 최적화 모델

An Optimization Model for Capacity Planning of Electrical Die Sorting Process in Semiconductor Manufacturing

김해중 ( Hae Joong Kim ) , 임대은 ( Dae-eun Lim )
  • : 대한설비관리학회
  • : 대한설비관리학회지 26권1호
  • : 연속간행물
  • : 2021년 03월
  • : 41-52(12pages)
대한설비관리학회지

DOI


목차

1. Introduction
2. Related Literature
3. Model Formulation
4. System implementation and Experiment
5. Result and Conclusion
References

키워드 보기


초록 보기

In this paper, a mixed-integer programming (MIP) based capacity planning model for the electrical die sorting (EDS) process where probe cards are used as consumables in semiconductor facilities is presented. The model is designed to satisfy the demand while maximizing the utilization of testers and probe cards in hand. As a result, the level of resource procurement can stay at the minimum level in which directly can be translated into positive profitability. This research employs the decomposition methodology to convert the MIP formulation into a “solver recognizable” format. By doing so, the decomposed model can provide near-optimal solutions instantaneously for practical application and the positive outcome is projected to be over several million dollars.

UCI(KEPA)

간행물정보

  • : 공학분야  > 산업공학
  • : KCI등재
  • :
  • : 계간
  • : 1598-2475
  • :
  • : 학술지
  • : 연속간행물
  • : 1996-2021
  • : 1088


저작권 안내

한국학술정보㈜의 모든 학술 자료는 각 학회 및 기관과 저작권 계약을 통해 제공하고 있습니다.

이에 본 자료를 상업적 이용, 무단 배포 등 불법적으로 이용할 시에는 저작권법 및 관계법령에 따른 책임을 질 수 있습니다.

26권2호(2021년 06월) 수록논문
최근 권호 논문
| | | |

KCI등재

1설비오류진단에서 가중 증거 척도를 이용한 다중센서 데이터 융합

저자 : 최성운 ( Sungwoon Choi )

발행기관 : 대한설비관리학회 간행물 : 대한설비관리학회지 26권 2호 발행 연도 : 2021 페이지 : pp. 5-19 (15 pages)

다운로드

(기관인증 필요)

초록보기

This study proposes a multisensor fusion method to accurately detect the evidence of fault target when machine fault evidences are highly conflicting and when the machine fault evidences between sensors have no similarities.
This fusion method uses a combined weight which is composed of evidence entropy and belief distance. In this study, improved evidence entropy (IEE) system independently and broadly measures uncertain information of rarely occurring fault evidence. IEE measure includes four major factors including the mass function, the numbers of all fault targets, focal elements and intersection between focal elements. Among these four factors, the redundant intersection part of all fault targets was removed to reflect more uncertain information volume and quality. Based on the degree of conflict, Euclidean distance and cross entropy, belief distance measure optimizes consistency and similarity between sensor evidences.
Combined weight is adjusted with the fault target evidences and fused by orthogonal combination rule. Numerical cases in machine fault diagnosis are demonstrated to describe the practicality and accuracy of the proposed multisensor data fusion rule.

KCI등재

2극소불량률 관리를 위한 Zp-EWMA 관리도 설계

저자 : 김진국 ( Jin-kuk Kim ) , 김창수 ( Chang-soo Kim )

발행기관 : 대한설비관리학회 간행물 : 대한설비관리학회지 26권 2호 발행 연도 : 2021 페이지 : pp. 21-30 (10 pages)

다운로드

(기관인증 필요)

초록보기

The conventional Shewhart control chart techniques have found wide application in the manufacturing industries. However that chart is less sensitive to a very small shift and fraction nonconforming. Kim & Um(2012) first introduced the ZP control scheme for controlling a very small fraction nonconforming at the ppm level. The purpose of this paper is studying the exponentially weighted moving average(EWMA) control chart for detecting small shifts relatively and design the ZP - EWMA control charts combined with ZP. In addition, to obtain sensitivity to the initial phase of the process, the FIR ZP - EWMA control charts is analyzed to confirm the performance as actual case.

KCI등재

3SUV 자동차 내부에서 마이크로폰 위치 선정에 관한 연구

저자 : 김효수 ( Hyosoo Kim ) , 강성진 ( Kang Sungjin ) , 최종태 ( Choi Jongtae ) , 황인극 ( Inkeuk Hwang ) , 이용건 ( Lee Yong Keon )

발행기관 : 대한설비관리학회 간행물 : 대한설비관리학회지 26권 2호 발행 연도 : 2021 페이지 : pp. 31-39 (9 pages)

다운로드

(기관인증 필요)

초록보기

In recent years, vehicles are changing from means of transportation to means of providing various conveniences by reflecting the needs of consumers. In response to these changes, vehicle digital technology is developing, and the installation of mobile and multi-devices in vehicles is also increasing significantly. However, the more various digital technologies in the vehicle are reflected, the more handling mobile and multi-devices while driving, which may increase the risk of traffic accidents due to distraction and carelessness.
This thesis investigates the installation position of the microphone in different types of vehicles, and presents the optimal installation position of the microphone in the vehicle, which is recognized the driver's speech when the driver makes a sound while seated in the driver's seat.

KCI등재

4휴먼에러 저감을 위한 도시철도 운전실 레이아웃 표준화 연구

저자 : 갈원모 ( Won-mo Gal ) , 염병수 ( Byeoung-soo Yum )

발행기관 : 대한설비관리학회 간행물 : 대한설비관리학회지 26권 2호 발행 연도 : 2021 페이지 : pp. 41-47 (7 pages)

다운로드

(기관인증 필요)

초록보기

Currently, locomotive cabs' layout differ depending on the type of train vehicles. In order to reduce human error of drivers, systematic research including analysis of the working conditions of urban railroads in Korea and standardization measures are needed accordingly. Through the survey of 247 drivers working Seoul Metro Lines 1, 2, 3 and 4 and interview with related experts, we will identify areas of vulnerability in the driver human error. Many drivers felt uncomfortable with the distinction between the handling buttons, the distance between switches, the movement and function, and the arrangement by operation frequency, It was also able to identify difficulties in identifying the display and operation by color and symbol when handling the control device, as the viewing range and physical conditions differed.

KCI등재

5전두엽의 알파파 활성패턴과 실내온도가 생산성에 미치는 영향

저자 : 김명호 ( Myung Ho Kim )

발행기관 : 대한설비관리학회 간행물 : 대한설비관리학회지 26권 2호 발행 연도 : 2021 페이지 : pp. 49-56 (8 pages)

다운로드

(기관인증 필요)

초록보기

In this study, concentration were measured in the air conditioned room by subjects of two type: A and B. The state of air conditioned room was in relative humidity 50[RH%] and intensity of illumination 1000[lux] with arranging up variable temperatures from 19[℃] to 30[℃] at intervals of 3[℃].
At the result, 25[℃] for A type and 22[℃] for B type, relative Mα wave, relative Mβ wave, SEF50 and SDNN were invigorated and both sides α wave asymmetry quotient, HRT, stress quotient and fatigability were declined. It was found that A type was sharper than B type about temperature, and also they have different preferences for productivity and concentration about temperature.

KCI등재

6포스트 코로나 시대 온라인 플랫폼 프로젝트중심학습을 활용한 전문직 간 교육 프로그램 개발 : 보건계열 대학생을 중심으로

저자 : 주현정 ( Hyun-jung Ju ) , 윤보영 ( Bo-young Yoon ) , 천부순 ( Pu-soon Chun ) , 김상희 ( Sang-hee Kim )

발행기관 : 대한설비관리학회 간행물 : 대한설비관리학회지 26권 2호 발행 연도 : 2021 페이지 : pp. 57-64 (8 pages)

다운로드

(기관인증 필요)

초록보기

Online learning has been provided to students in universities due to the spread of COVID-19. Online collaborative learning can support interaction between learners and develop problem-solving and self-directed learning abilities. Interprofessional education (IPE) develops healthcare students as future interprofessional team members by learning together about each others' roles and practicing collaboration and teamwork, which can provide quality patient care. The purpose of this study is to develop an IPE program utilizing online platform project-based learning. In the IPE program, participants are faculty members and students from three departments―medicine, nursing, and pharmacy. At the phase of design, we defined three core competencies―communication, collaboration, and professionalism―and course objectives, organized student groups and matched the groups with faculty members using a team-teaching model, and selected online platform project-based learning as instructional methods. At the phase of development, we developed learning processes and content for a fifteen-week-long course, including six steps: preparing, selecting, planning, executing, creating, and presenting, and evaluating. We also developed a guide for instructors and strategies for students' team projects. For instructors to play a role facilitators in an online learning environment, faculty development systems and resources will be needed. Future studies will need to conduct program evaluations to investigate the effectiveness of the IPE program.

1
권호별 보기
같은 권호 다른 논문
| | | | 다운로드

KCI등재

1야간 조명설비의 조광제어에 의한 소비전력 절감에 관한 연구

저자 : 김명호 ( Myung Ho Kim )

발행기관 : 대한설비관리학회 간행물 : 대한설비관리학회지 26권 1호 발행 연도 : 2021 페이지 : pp. 5-11 (7 pages)

다운로드

(기관인증 필요)

초록보기

While local autonomous' night lighting facilities are constantly increasing, control system for them are staying at basic level such as on-off control or a system where every two street lights are turned on, which significantly increases operation and management expense. Thus, this study controlled night lighting facilities by controlling the intensity of illumination to each 0%, 50% and 100% according to the frequency of road usage in the previous controlling system, thereby enabling remote bidirectional control between the administrator and the light pole in terms of lonworks power line communication. As a result, by controlling the intensity of illumination to 0%, 5% and 100% according to frequency of road usage, approximately 40% of energy consumption was saved compared to the previous control system. At the same time, rather than dealing with situations after citizens' report, it became possible to prevent complaints and safety accidents in advance through remote control.

KCI등재

2자동창고시스템에서 분할 배치크기 인출 시 기대 반응시간을 최소화하는 저장/인출 차량의 대기점

저자 : 장석화 ( Suk-hwa Chang )

발행기관 : 대한설비관리학회 간행물 : 대한설비관리학회지 26권 1호 발행 연도 : 2021 페이지 : pp. 13-27 (15 pages)

다운로드

(기관인증 필요)

초록보기

This paper addresses the relative pre-positioning point of storage/retrieval vehicle to minimize the expected response time when the items in storage bin of the rack in an automated storage/retrieval system are retrieved as the divided batch size. The retrievals for the items begin when the number of the order reaches the plan batch size. The plan batch size is divided as the retrieval batch sizes and the items are retrieved as the retrieval batch size. When a storage/retrieval vehicle is idle within aisle, the vehicle stays at the relative pre-positioning point that minimizes the expected response time. The expected response time is the travel time from the pre-positioning point to the first retrieval point of the plan batch size. When each column of storage location comes to the first retrieval location of each retrieval batch size, the retrieval probability is analyzed. The relative pre-positioning point that minimizes the expected response time is obtained through these retrieval probabilities. The solution procedure is developed, and the numerical examples are shown to explain the solution procedure.

KCI등재

3특수기 소포우편 물동량 예측시스템 개발

저자 : 김은혜 ( Eunhye Kim ) , 정훈 ( Hoon Jung )

발행기관 : 대한설비관리학회 간행물 : 대한설비관리학회지 26권 1호 발행 연도 : 2021 페이지 : pp. 29-39 (11 pages)

다운로드

(기관인증 필요)

초록보기

In the postal logistics service, rapid change in mail volume and requirements for shortening delivery time make operational optimization a fundamental concern. The mail traffic forecasting is essential for optimizing the resource operation of major postal infrastructures such as post offices, sorting centers, exchange centers, and delivery stations. In particular, in extreme event periods where the volume of traffic increases by about 1.4 times compared to normal, it is important to establish a resource operation plan at the logistics infrastructures for ensuring delivery service quality to the public. This paper addresses an extreme event prediction problem for Korea Post's parcel logistics service. The main purpose of this paper is to describe the development of extreme event prediction system and to introduce an application of the prediction system to postal parcel service site. The extreme event prediction system for Korea Post's parcel logistics service develops a hybrid prediction model based on internal and external factor-based features and ensemble models, and enables flexible prediction in consideration of traffic patterns by applying input features and model selection and parameter adjustment functions.

KCI등재

4반도체 EDS 검사 공정의 설비 용량 계획에 관한 최적화 모델

저자 : 김해중 ( Hae Joong Kim ) , 임대은 ( Dae-eun Lim )

발행기관 : 대한설비관리학회 간행물 : 대한설비관리학회지 26권 1호 발행 연도 : 2021 페이지 : pp. 41-52 (12 pages)

다운로드

(기관인증 필요)

초록보기

In this paper, a mixed-integer programming (MIP) based capacity planning model for the electrical die sorting (EDS) process where probe cards are used as consumables in semiconductor facilities is presented. The model is designed to satisfy the demand while maximizing the utilization of testers and probe cards in hand. As a result, the level of resource procurement can stay at the minimum level in which directly can be translated into positive profitability. This research employs the decomposition methodology to convert the MIP formulation into a “solver recognizable” format. By doing so, the decomposed model can provide near-optimal solutions instantaneously for practical application and the positive outcome is projected to be over several million dollars.

KCI등재

5음식물 쓰레기 수거에서 거래처 방문 일정과 차량 경로 동시 결정 문제

저자 : 양병학 ( Byoung-hak Yang ) , 김보송 ( Bo-song Kim )

발행기관 : 대한설비관리학회 간행물 : 대한설비관리학회지 26권 1호 발행 연도 : 2021 페이지 : pp. 53-64 (12 pages)

다운로드

(기관인증 필요)

초록보기

Food waste collection company should decide weekly visiting scheduling and daily vehicle routing for pick up points during a week. A mathematical model to minimize travelling distance was introduced. The mathematical model shows that the characteristics of problem was similar to the travelling sales man and the scheduling problem. Four evolutionary algorithm with penalty cost function to handle constraints were developed to solve our problem. A feasibility search operation was used to increase the feasibility on the solution set. Experimental results show that the average objective value dropped by 9% by using the feasibility search operation, but the calculation time increased by 12%.

KCI등재

6지진 위험 지대에서 건물 침하 분석을 위한 GNSS 기반 건물 침하감지의 데이터 활용 침하 경향 분석

저자 : 김성호 ( Sungho Kim ) , 황상호 ( Sang-ho Hwang ) , 권오언 ( Oeon Kwon ) , 석수영 ( Soo-young ) , 천승만 ( Seung-man Chun )

발행기관 : 대한설비관리학회 간행물 : 대한설비관리학회지 26권 1호 발행 연도 : 2021 페이지 : pp. 65-72 (8 pages)

다운로드

(기관인증 필요)

초록보기

In this paper, the settlement data was collected using the settlement detector developed in the previous study, and a settlement trend analysis method was presented based on the collected data. The settlement trend analysis method was largely composed of three mathematical steps. The first formula measures an error range based on latitude and longitude, and the second formula determines whether to use the data for the error range. The last equation was analyzed through a method that can filter the distributed altitude information by intermediate values.
Through these results, in this paper, it was possible to confirm the information on settlement through three equations and analysis results for the error of the building where the building settlement occurs through the settlement detector developed in the previous study.

KCI등재

7인간친화형 홈로봇 UI/UX 개발에 관한 연구

저자 : 김지관 ( Jiekwan Kim )

발행기관 : 대한설비관리학회 간행물 : 대한설비관리학회지 26권 1호 발행 연도 : 2021 페이지 : pp. 73-83 (11 pages)

다운로드

(기관인증 필요)

초록보기

In this paper, we proposes a development process that utilizes collective intelligence based on the Kansei engineering product development theory and explains the UI/UX development process of a home robot using it. In order to develop a home robot, it is necessary to first grasp the requirements of the market. However, there is a need to redefine the definition of home robots in a situation where AI speakers, cleaning robots and pet robots are currently classified as home robots. To solve the this problem, we introduce the Delphi method in which experts in the field related to home robot development establish the concept as a group into the function deployment type product development process. And this study exemplifies the entire process of product development from the composition of the project team for home robot development to the establishment of Zero-Concept(0-level Kansei) of the product and the technology development roadmap related to the user experience scenario. It also introduces the process of determining the product development roadmap by arranging the quality characteristics of each target customer through Kano analysis. The case of home robot product concept development will serve as the basis for a product development process that can preoccupy the market by supplying products in a timely manner in line with the market formation in the development of new products that have not formed a market.

1
발행기관 최신논문
자료제공: 네이버학술정보
발행기관 최신논문
자료제공: 네이버학술정보

내가 찾은 최근 검색어

최근 열람 자료

맞춤 논문

보관함

내 보관함
공유한 보관함

1:1문의

닫기